Home ReviewsRefund
Home/Opel/Antara/Opel Antara I (2007-2011)/Repair manual/Fuel Injection Systems/Engine Coolant Temperature (ECT) Sensor Replace
Contents Wiring diagrams Section: Fuel Injection Systems All sections

Engine Coolant Temperature (ECT) Sensor Replace Opel Antara I

Fuel Injection Systems 2 illustrations

Engine Coolant Temperature (ECT) Sensor Replace

Removal/Installation Procedure

  1. Disconnect the negative battery cable.
  2. Remove beauty cover. Refer to Beauty Cover Replace .
  1. Disconnect the ECT sensor connector.
  2. Remove the ECT sensor.

Tighten

Tighten the ECT sensor to 35 N•m (25.8 lb-ft).

More articles — Engine and Engine Aggregates