Home ReviewsRefund
Home/Opel/Agila/Opel Agila B (2008-2011)/Repair manual/Engine Mechanics - D13A/Engine Oil Pressure Switch Replacement
Contents Wiring diagrams Section: Engine Mechanics - D13A All sections

Engine Oil Pressure Switch Replacement Opel Agila B

Engine Mechanics - D13A 2 illustrations

Remove

  1. 1. Remove trim cover from engine • Remove 4x bolt
  2. 2. Remove oil pressure switch (1) from cylinder head • Place collecting container below • Disconnect harness connector

Install

  1. 3. Install new oil pressure switch (1) 32 Nm to cylinder head • Apply suitable sealant to threads of oil pressure switch • Connect harness connector
  2. 4. Install trim cover to engine • Install 4x bolt 8 Nm

More articles — Engine