WarningDeactivate the pneumatic suspension before lifting the vehicle (2 or 4 post lift, workshop jack or customer's jack)
Recommended tools
[1] stripping tool (-).1350-ZZ
Removing
Switch off the ignition
Wait 3 minutes before disconnecting the battery
Disconnect the battery
Remove
- The front wheels
- The front splash shields
- The front bumper
- The front headlamp
Remove
- The (1) bolt
- The bolts (2)
Disconnect the connector of the wing side repeater (as "a")
Remove
- Remove the side repeater (3)
- The wing seal (4)
Remove the bolts (5)
Unclip the trim (7); using tool [1]
Remove bolts (6)
Remove bolts (9)
Unclip the cover (8) (as "b")
Remove bolts (10)
Remove
- The bolts (11)
- The front wing (12)
Refitting
Proceed in the reverse order to removal
Adjust the fits and clearances
Tighten
- The bolts (1), (2), (5) (11) to 1,8 ± 0,1 daN.m
- The bolts (6), (9), (10) to 0,5 ± 0,1 daN.m
Reconnect the battery
WarningPerform the operations to be carried out following reconnection of the battery
Check all the equipment works