FLUID CAPACITIES
| Application | Drain & Refill - Qts. (L) (2) | Overhaul - Qts. (L) | Dry Fill - Qts. (L) |
|---|---|---|---|
| All Models | 7.4 (7.0) | 10.0 (9.5) | 13.4 (12.7) |
| (1) Fluid capacities listed are approximate. Always fill to specified area on dipstick. (2) Drain and refill capacity does not include torque converter. | |||
| (1) | Fluid capacities listed are approximate. Always fill to specified area on dipstick. |
| (2) | Drain and refill capacity does not include torque converter. |
FLUID CAPACITIES (1)
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Case Cover Bolt (1) | ||
| Bolt No. 3 | 18 (25) | |
| Bolts No. 1, 2 & 4 | (2) | |
| Case Extension Bolt | 26 (35) | |
| Case Side Cover Bolt (3) | 18 (25) | |
| Control Valve Body Bolt (4) | ||
| Bolts No. 1-5 | (2) | |
| Bolt No. 6 | 12 (16) | |
| Bolt No. 7 | 18 (25) | |
| Bolt No. 8 | (5) | |
| Bolt No. 9 | (2) | |
| Converter-To-Flexplate Bolt | 46 (62) | |
| Driven Sprocket Support Bolt | 18 (25) | |
| Manual Shaft-To-Detent Lever Nut | 24 (33) | |
| Oil Cooler Fitting | 28 (38) | |
| Shift Shaft Nut | 23 (31) | |
| 2-1 Manual Band Servo Cover Bolt | 18 (25) | |
| INCH Lbs. (N.m) | ||
| Accumulator Bolt | 106 (12) | |
| Accumulator Cover-To-Case Bolt | 106 (12) | |
| Forward Band Servo Cover Bolt | 106 (12) | |
| Manual Valve Shift Detent Bolt | 106 (12) | |
| Oil Pan Bolt | 120 (14) | |
| Oil Pressure Test Plug | 106 (12) | |
| Oil Pump Bolt (6) | ||
| Bolt No. 1 | 71 (8) | |
| Bolts No. 2 & 3 | 106 (12) | |
| Vehicle Speed Sensor Bolt | 106 (12) | |
| (1) (Схема №30) (2) Tighten bolts to 106 INCH lbs. (12 N.m). (3) (Схема №21) (4) (Схема №24) (5) Tighten bolts to 71 INCH lbs. (8 N.m). (6) (Схема №23) | ||
| (1) | (Схема №30) |
| (2) | Tighten bolts to 106 INCH lbs. (12 N.m). |
| (3) | (Схема №21) |
| (4) | (Схема №24) |
| (5) | Tighten bolts to 71 INCH lbs. (8 N.m). |
| (6) | (Схема №23) |
TORQUE SPECIFICATIONS
TRANSAXLE SPECIFICATIONS
| Application (End Play) | In. (mm) |
|---|---|
| Differential Carrier Planetary Pinion Gears | .009-.025 (.23-.64) |
| Front Differential Carrier | .005-.025 (.13-.64) |
| Input Carrier Pinion Gears | .009-.030 (.23-.76) |
| Input Clutch Housing | 0-.006 (0-.15) |
| Reaction Carrier Pinion Gear | .009-.030 (.23-.76) |
| Torque Converter | 0-.020 (0-.50) |
TRANSAXLE SPECIFICATIONS