Home ReviewsRefund
Home/Chevrolet/Venture/Chevrolet Venture I (1996-2005)/Repair manual/Automatic Trans/Automatic Transaxle Overhaul & Testing - 4T65-E: Maintenance
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transaxle Overhaul & Testing - 4T65-E: Maintenance Chevrolet Venture I

Automatic Trans ~106 words

LUBRICATION

For additional information, see appropriate AUTOMATIC TRANSMISSION SERVICING article in TRANSMISSION SERVICING.

RECOMMENDED FLUID

Manufacturer recommends Dexron-III Automatic Transmission Fluid (ATF).

OIL COOLER FLUSHING

  1. If available, fill Line Flusher (J-35944) with solution, and install oil cooler and line flusher to transaxle cooler lines on transaxle. Follow line flusher manufacturer's instructions to flush oil cooler and cooler lines.
  2. If line flusher is not available, flush cooler and cooler lines with mixture of clean solvent and water. Flush cooler in both directions until all old fluid and debris are removed. If necessary, replace plugged or damaged cooler and/or lines.

More articles — Automatic Transaxle Overhaul & Testing - 4T65-E