Home ReviewsRefund
Home/Volvo/V70/Volvo V70 II (2000-2004)/Repair manual/Body Electrical/Breakout Box, Control Module - Activation & Connection: Rem…
Contents Wiring diagrams Section: Body Electrical All sections

Breakout Box, Control Module - Activation & Connection: Removal & Installation Volvo V70 II

Body Electrical

Installation

  1. Screw the antenna amplifier into place
  2. Install the connectors
  3. Install «Panel, cantrail, replacing»(ref-406997-S25965666552011070100000) .
  1. Connect the connector
  2. Install the lip on the antenna
  3. Install the clip fully using flat nose pliers. Pull the clip down through the hole.

More articles — Breakout Box, Control Module - Activation & Connection