Manual sections

Wiring diagrams

• Abbreviations
• Accessories Control Systems
• Accessory Drive Belts
• Airbag
• Alarm System, Control Modules, Engine Management Systems - Design and Function
• Alarm, Navigation, Parking Assistance - Installation Instructions, Accessories (Xc)
• Antenna Systems
• Anti-Lock/traction Control
• Anti-Theft- Installation Instructions, Accessories
• Application
• Audio, Interior Panels, Seat Components - Removal & Installation
• Automatic HVAC System
• Automatic Trans
• Auxiliary Emission Control Systems
• Axle Shafts
• Basic Trouble Shooting
• Blowers, Superchargers & Turbochargers
• Body and Interior Systems - Removal, Replacement, Specifications
• Body Electrical
• Body Frame - Removal, Replacement and Installation
• Body Frame - Removal, Replacement and Installation (Xc)
• Brake System Components - Removal and Installation
• Brakes
• Brakes Control Systems
• Brakes, Transmission - Torque, Removal and Installation
• Bulbs, Control Modules, Charging - Design and Function
• Bumpers & Side Panels - Removal & Installation
• Cabin Air Filter
• Cables and Fuses - Removal, Replacement and Installation
• Cables and Fuses - Removal, Replacement and Installation (Xc)
• Center Differential, Drive Shaft, Half Shaft- Removal, Replacement and Installation
• Charging System
• Check Lists
• Child Seat & Accessories - Installation Instructions, Accessories (Xc)
• Climate Units - Installation Instructions, Accessories
• Climate Units - Installation Instructions, Accessories (Xc)
• Climate Units - Removal, Replacement and Installation
• Climate Units - Removal, Replacement and Installation (Xc)
• Clutch - Removal, Replacement and Installation
• Clutches Manual & Hydraulic
• Collision/avoidance
• Communication Devices
• Computer Relearn
• Connectors, Modules, Switches, Sensors - Removal, Replacement and Installation
• Control Modules - Design and Function (Xc) - 1 of 2
• Control Modules - Design and Function (Xc) - 2 of 2
• Control Modules, Restraint System, Starter, Sun Roof, Tire Pressure Monitoring, Transmission - Design and Function
• Cooling Fan
• Cooling System (Mechanical)
• Crank Mechanism, Valve Mechanism, and Variable Valve Timing (VVT) - Cleaning, Inspection and Adjustment
• Cruise Control Systems
• Diagnostic Connector Locations
• Differentials & Drive Axles
• Door Locks & Anti-Theft Systems
• Doors, Lids, Sun Roof - Removal, Replacement and Installation
• Drive Cycles
• Driveline/axles
• Driveshaft & Universal Joints
• DTC Index
• Electonic Modules & Monitoring Systems - Design and Function (Xc)
• Electrical - Connector Identification
• Electrical Component Locations
• Electronic Steering
• Electronic Suspension
• Emission Applications
• Engine
• Engine - Cleaning, Inspection and Adjustment (Xc)
• Engine - Overhaul Instructions
• Engine - Overhaul Instructions (Xc)
• Engine - Removal, Replacement and Installation
• Engine - Removal, Replacement and Installation (Xc)
• Engine Control - Specifications, Removal & Installation
• Engine Control Systems
• Engine Performance
• Engine, Fuel & Ignition Control Systems - Removal & Installation, Specifications
• Entertainment Systems
• Exhaust
• Exterior Body Panels
• Exterior Lights
• Exterior Trim, Glass, Mirror, Weatherstrips - Removal, Replacement and Installation (Xc)
• Exterior Trim, Glass, Weatherstrips - Removal, Replacement and Installation
• Exterior/interior Trim
• Frames, Subframes & Crossmembers
• Front Wheel Suspension - Removal, Replacement and Installation
• Front Wheel Suspension - Removal, Replacement and Installation (Xc)
• Fuel System
• Fuel System - Removal, Replacement and Installation
• Fuel, Ignition & Engine Control Systems - Removal, Installation & Specifications
• Fusebox, Sensors - Identification, Removal & Installation
• Fuses & Circuit Breakers
• Gauges & Instrument Panels
• Gearbox, Input/output Speed Sensor - Removal & Installation
• Gearbox, Selector Cable, Selector Knob - Removal & Installation
• Headlights
• Heated Glass/defoggers
• Hoist/jack
• Identification
• Ignition and Control Systems - Symptom Related Diagnostic Procedures (Xc)
• Ignition System
• Interior - Installation Instructions, Accessories
• Interior - Removal, Replacement and Installation
• Interior Equipment - Installation Instructions, Accessories
• Interior Equipment - Installation Instructions, Accessories (Xc)
• Interior Equipment - Removal, Replacement and Installation
• Interior Equipment, Restraints - Removal, Replacement and Installation (Xc)
• Interior/illumination Lights
• Lubrication System
• Manual & Power Steering
• Manual Trans
• Mechanical
• Mechanical - Hydraulic
• Media, Communication and Navigation - Installation Instructions, Accessories (Xc)
• Media, Communication and Navigation - Installation Instructions, Accessories - 1 of 2
• Media, Communication and Navigation - Installation Instructions, Accessories - 2 of 2
• Metric Conversions
• Mirrors
• Mode 6
• Navigation System
• Oem General Information
• Paint/coatings
• Parking Brake System
• Passive Restraints
• Procedures
• Radiator, Transmission Components - Removal & Installation
• Rear Axle, Drive Shafts - Removal, Replacement and Installation (Xc)
• Rear Wheel Suspension - Removal, Replacement and Installation
• Rear Wheel Suspension - Removal, Replacement and Installation (Xc)
• Reset Procedures
• Restraints
• Restraints - General Safety Information (Xc)
• Restraints, Seats, Windows - Removal & Installation
• Seats
• Seats - Removal, Replacement and Installation (Xc)
• Specifications
• Starter
• Steering
• Steering Column
• Steering Column Switches
• Steering Gear
• Sun Roof/t-Top/convertible Top
• Suspension Front
• Suspension Rear
• Switches & Electrical Equipment - Removal, Replacement and Installation (Xc)
• Testing & Diagnostics
• Theory & Operation
• Timing Belt
• Towing & Storage- Installation Instructions, Accessories (Xc)
• Towing & Storage- Installation Instructions, Accessories (Xc): Removal & Installation
• Towing and Auxiliary Storage - Installation Instructions, Accessories
• Towing Systems
• Traction Control Disable
• Transmission
• Transmission - Checking/fault Tracing, Installing (Xc)
• Transmission - Cleaning, Inspection and Adjustment
• Transmission - Cleaning, Inspection and Adjustment (Xc)
• Transmission - Gear Selector, Lubrication
• Transmission - Lubrication, Bevel Gear & Pinion Seal (Xc)
• Transmission - Preparations for Removal & Installation (Xc)
• Transmission - Removal & Installation
• Transmission - Removal, Replacement and Installation (Xc)
• Transmission - Removal, Replacement and Installation - Part 1
• Transmission - Removal, Replacement and Installation - Part 2
• Transmission Control Systems
• Transmission, Transmission Control Module (TCM), Fluid, Speed Sensor - Removal & Replacement
• Warning System
• Wheel & Tire System
• Wheel Alignment
• Wheel Hubs
• Windows
• Wiper/washer Systems

Repair manual

Transmission - Removal, Replacement and Installation - Part 2 Volvo V70 II

Step-by-step instructions on "Transmission - Removal, Replacement and Installation - Part 2" for Volvo V70 II (2000–2004). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

182subsections

182articles

190illustrations

Information

1 article

• Information

Primary shaft seal

1 article

• Primary shaft seal

Primary shaft seal 41 mm

1 article

• Primary shaft seal 41 mm 3

Installing the clutch cylinder

1 article

• Installing the clutch cylinder 1

Primary shaft seal 44.6 mm

1 article

• Primary shaft seal 44.6 mm

Removing the clutch cylinder

1 article

• Removing the clutch cylinder 2

Installing the rubber seal for the pipe in the clutch cover

1 article

• Installing the rubber seal for the pipe in the clutch cover

Installing the collision protection system over the steering gear (right-hand drive cars)

1 article

• Installing the collision protection system over the steering gear (right-hand drive cars)

Lifting the engine and gearbox to the horizontal position

1 article

• Lifting the engine and gearbox to the horizontal position 2

Installing the subframe on the bodywork

1 article

• Installing the subframe on the bodywork

Installing the sealing ring for the CV joint housing

1 article

• Installing the sealing ring for the CV joint housing

Installing the left drive shaft on the gearbox, stub axle and control arm

1 article

• Installing the left drive shaft on the gearbox, stub axle and control arm

Installing the screws for the front engine pad

1 article

• Installing the screws for the front engine pad 3

Installing the right drive shaft on the gearbox, stub axle and control arm

1 article

• Installing the right drive shaft on the gearbox, stub axle and control arm

Installing new lock nuts on the steering gear

1 article

• Installing new lock nuts on the steering gear

Lowering the car and removing the lifting beam and lifting tools from the engine

1 article

• Lowering the car and removing the lifting beam and lifting tools from the engine

Gearbox, removing

1 article

• Gearbox, removing

Disconnecting the battery lead

1 article

• Disconnecting the battery lead

Removing engine compartment components

1 article

• Removing engine compartment components 1

Continue removing engine compartment components

1 article

• Continue removing engine compartment components

Plugging the hose as far as the clutch master cylinder

1 article

• Plugging the hose as far as the clutch master cylinder

Removing the mounting screws for the gearbox and starter motor

1 article

• Removing the mounting screws for the gearbox and starter motor

Removing the coolant hose from the heater unit

1 article

• Removing the coolant hose from the heater unit 3

Removing the air baffle and splash guard under the engine

1 article

• Removing the air baffle and splash guard under the engine

Removing the screw for the cable conduit

1 article

• Removing the screw for the cable conduit 2

Removing the charge air pipe

1 article

• Removing the charge air pipe

Removing the control arms and track rod (both sides)

1 article

• Removing the control arms and track rod (both sides)

Removing the nut from the ball joint (both sides)

1 article

• Removing the nut from the ball joint (both sides)

Removing the screws from the sub-frame support plates (both sides)

1 article

• Removing the screws from the sub-frame support plates (both sides)

Removing the stub axle from the control arm

1 article

• Removing the stub axle from the control arm

Removing the drive shaft from the stub axle (right-hand side)

1 article

• Removing the drive shaft from the stub axle (right-hand side)

Removing the sealing ring for the CV joint housing

1 article

• Removing the sealing ring for the CV joint housing

Removing the cap for the drive shaft support bearing

1 article

• Removing the cap for the drive shaft support bearing

Removing the drive shaft

1 article

• Removing the drive shaft

Pressing up the sub-frame on the right-hand side

1 article

• Pressing up the sub-frame on the right-hand side

Removing the screw from the starter motor and the exhaust pipe from the turbocharger (TC)

1 article

• Removing the screw from the starter motor and the exhaust pipe from the turbocharger (TC)

Removing the front cross member

1 article

• Removing the front cross member

Removing the screw for the rear engine pad

1 article

• Removing the screw for the rear engine pad

Removing the rear engine mounting

1 article

• Removing the rear engine mounting

Removing the screw and clamp from the gearbox and engine

1 article

• Removing the screw and clamp from the gearbox and engine

Preparatory work for removing the stub axle on the left-hand side

1 article

• Preparatory work for removing the stub axle on the left-hand side 1

Lowering the sub-frame

1 article

• Lowering the sub-frame

Lowering the engine and gearbox

1 article

• Lowering the engine and gearbox

Removing the collision protection system over the steering gear

1 article

• Removing the collision protection system over the steering gear

Installing the fixture on the mobile jack

1 article

• Installing the fixture on the mobile jack

Removing the gearbox

1 article

• Removing the gearbox 2

Installing splash guards and front wheels

1 article

• Installing splash guards and front wheels

Checking before installing

1 article

• Checking before installing 13

Installing the crossmembers

1 article

• Installing the crossmembers 4

Installing the nuts on the fender liner

1 article

• Installing the nuts on the fender liner

Checking the oil level in the transmission

1 article

• Checking the oil level in the transmission 3

Installing the water hose

1 article

• Installing the water hose 1

Finishing

1 article

• Finishing

Transmission, removing

1 article

• Transmission, removing 1

Removing the mounting screws from the gearbox

1 article

• Removing the mounting screws from the gearbox

Installing the lifting beam and lifting hook on the engine lifting eyelet

1 article

• Installing the lifting beam and lifting hook on the engine lifting eyelet 1

Removing components around the sub-frame

1 article

• Removing components around the sub-frame

Removing links, tie rod and bolt for the drive shaft

1 article

• Removing links, tie rod and bolt for the drive shaft 1

Removing the sealing ring for the CV joint housing from the stub axle

1 article

• Removing the sealing ring for the CV joint housing from the stub axle 1

Removing the cross members

1 article

• Removing the cross members

Removing the bracket for the power supply cable for the heated oxygen sensor (HO2S) from the sub-frame

1 article

• Removing the bracket for the power supply cable for the heated oxygen sensor (HO2S) from the sub-frame

Removing the left drive shaft from the gearbox

1 article

• Removing the left drive shaft from the gearbox

Removing bevel gear

1 article

• Removing bevel gear

Removing the collision protection system over the steering gear (Only applies to right-hand drive vehicles)

1 article

• Removing the collision protection system over the steering gear (Only applies to right-hand drive vehicles) 1

Preparations when removing gearbox

1 article

• Preparations when removing gearbox

Installing fixture to mobile jack

1 article

• Installing fixture to mobile jack

Points to observe when replacing the control module

1 article

• Points to observe when replacing the control module 3

Ordering software

1 article

• Ordering software

Cover brake cylinder B4 automatic transmission, replacing

1 article

• Cover brake cylinder B4 automatic transmission, replacing

Removing components

1 article

• Removing components 5

Installing the snap ring

1 article

• Installing the snap ring

Adapting the control module

1 article

• Adapting the control module

Checking the function of the transmission

1 article

• Checking the function of the transmission

Replacing the gear-shift position sensor

1 article

• Replacing the gear-shift position sensor

Removing the gear-shift position sensor V70 2000- Model years 2000 and 2001

1 article

• Removing the gear-shift position sensor V70 2000- Model years 2000 and 2001 1

Removing the transmission cable

1 article

• Removing the transmission cable 1

Removing the connector from the transmission

1 article

• Removing the connector from the transmission 2

Installing the connector on the transmission

1 article

• Installing the connector on the transmission 1

Adjusting the gear-shift position sensor

1 article

• Adjusting the gear-shift position sensor

Installing the gear-shift position sensor, continued

1 article

• Installing the gear-shift position sensor, continued

Installing the gear selector cable

1 article

• Installing the gear selector cable

Installing engine compartment components

1 article

• Installing engine compartment components 2

Installing the gear-shift position sensor

1 article

• Installing the gear-shift position sensor 1

Preparations

1 article

• Preparations

Install the new sensor

1 article

• Install the new sensor

Insert the cables between the oil cooler hose and control system cover

1 article

• Insert the cables between the oil cooler hose and control system cover 2

Connect the connector to the transmission

1 article

• Connect the connector to the transmission

Install the air cleaner (ACL) housing

1 article

• Install the air cleaner (ACL) housing

Checking and adjusting the gear-shift position sensor

1 article

• Checking and adjusting the gear-shift position sensor 4

Installing the cable duct

1 article

• Installing the cable duct

Replacing the sealing ring for the oil pump

1 article

• Replacing the sealing ring for the oil pump

Removing the transmission

1 article

• Removing the transmission

Installing the transmission

1 article

• Installing the transmission

Sealing ring, gear shift linkage rod, replacing

1 article

• Sealing ring, gear shift linkage rod, replacing 1

Removing the gear-shift position sensor from the gear shift linkage rod

1 article

• Removing the gear-shift position sensor from the gear shift linkage rod 1

Solenoid control system, replacing

1 article

• Solenoid control system, replacing

Replacing and checking solenoids

1 article

• Replacing and checking solenoids

Removing the control system cover

1 article

• Removing the control system cover 11

Checking the resistance of SLT, SLS and SLU

1 article

• Checking the resistance of SLT, SLS and SLU

Replacing solenoids S1-S5

1 article

• Replacing solenoids S1-S5 5

Installing the control system

1 article

• Installing the control system 1

Conditions

1 article

• Conditions 1

Installing the oil plug

1 article

• Installing the oil plug 1

Checking the oil level

1 article

• Checking the oil level 5

Installing the angle gear

1 article

• Installing the angle gear 4

Installing the right-hand drive shaft to the gearbox, wheel spindle and link arm

1 article

• Installing the right-hand drive shaft to the gearbox, wheel spindle and link arm

Installing the collision protection system over the steering gear

1 article

• Installing the collision protection system over the steering gear 3

Removing the lifting beam

1 article

• Removing the lifting beam 2

Installing the service clips

1 article

• Installing the service clips 2

Installing the battery cable

1 article

• Installing the battery cable

Check

1 article

• Check 1

Removing the gearbox mounting screws

1 article

• Removing the gearbox mounting screws

Removing the coolant hose from the passenger compartment heater

1 article

• Removing the coolant hose from the passenger compartment heater

Removing the screw for the cable duct

1 article

• Removing the screw for the cable duct

Removing the cross members from the body

1 article

• Removing the cross members from the body

Exposing the steering shaft joint

1 article

• Exposing the steering shaft joint

Removing front suspension components (both sides)

1 article

• Removing front suspension components (both sides) 2

Removing the right-hand drive shaft

1 article

• Removing the right-hand drive shaft 4

Removing the oil pipe from the gearbox

1 article

• Removing the oil pipe from the gearbox 2

Removing all the screws for the gearbox and engine

1 article

• Removing all the screws for the gearbox and engine

Control system, replacing

1 article

• Control system, replacing

Engine wash

1 article

• Engine wash

Removing the air cleaner (ACL) housing

1 article

• Removing the air cleaner (ACL) housing 6

Removing the control system

1 article

• Removing the control system

Replacing the sealing rings.

1 article

• Replacing the sealing rings.

Checking the gear selector slider

1 article

• Checking the gear selector slider

Installing the control system cover

1 article

• Installing the control system cover

Installing components

1 article

• Installing components

Oil level, checking and adjusting

1 article

• Oil level, checking and adjusting

Installing splashguard under engine

1 article

• Installing splashguard under engine

Connecting sleeve

1 article

• Connecting sleeve

Removing the gear selector cable and connector

1 article

• Removing the gear selector cable and connector

Removing the gear-shift position sensor

1 article

• Removing the gear-shift position sensor

Installing the lever and the gear-shift position sensor

1 article

• Installing the lever and the gear-shift position sensor

Positioning control system

1 article

• Positioning control system 1

Screws and gasket

1 article

• Screws and gasket 1

Cover control system, replacing

1 article

• Cover control system, replacing

Removing the sub-frame

1 article

• Removing the sub-frame 5

Cleaning cover

1 article

• Cleaning cover

Installing cover

1 article

• Installing cover

Installing the sub-frame

1 article

• Installing the sub-frame

Filling of oil

1 article

• Filling of oil

Replacing the front sub-frame

1 article

• Replacing the front sub-frame 21

Measuring the position of the tie rod in the steering gear

1 article

• Measuring the position of the tie rod in the steering gear

Preparations for lowering the sub-frame

1 article

• Preparations for lowering the sub-frame 1

Lowering the engine and the gearbox

1 article

• Lowering the engine and the gearbox

Installing the fixture on the mobile jack and gearbox

1 article

• Installing the fixture on the mobile jack and gearbox

Installing the gearbox

1 article

• Installing the gearbox

Lifting the engine/gearbox

1 article

• Lifting the engine/gearbox

Installing the rear engine mounting

1 article

• Installing the rear engine mounting

Installing oil pipes to the transmission

1 article

• Installing oil pipes to the transmission

Installing the left drive shaft on the transmission and the wheel spindle

1 article

• Installing the left drive shaft on the transmission and the wheel spindle

Fitting the sub-frame to the body

1 article

• Fitting the sub-frame to the body

Installing the steering wheel shaft joint

1 article

• Installing the steering wheel shaft joint

Installing the cable conduit

1 article

• Installing the cable conduit

Fitting the remaining screws to the gearbox/starter motor

1 article

• Fitting the remaining screws to the gearbox/starter motor

Installing gear selector cable

1 article

• Installing gear selector cable

Software

1 article

• Software

Sealing ring oil pump, replacing

1 article

• Sealing ring oil pump, replacing

Preparatory work/Finishing work

1 article

• Preparatory work/Finishing work

Removing/installing

1 article

• Removing/installing 1

Removing cover control system

1 article

• Removing cover control system 3

Transmission control module (TCM), replacing

1 article

• Transmission control module (TCM), replacing 4

Installing the air cleaner (ACL) housing

1 article

• Installing the air cleaner (ACL) housing

Input shaft seal

1 article

• Input shaft seal 2

Shift shaft seal, replacing

1 article

• Shift shaft seal, replacing 4

Installing the shift lever

1 article

• Installing the shift lever

Gear selector, replacing

1 article

• Gear selector, replacing

Seal primary shaft, replacing

1 article

• Seal primary shaft, replacing

Preparatory work

1 article

• Preparatory work 3

Transmission, installing

1 article

• Transmission, installing 3

Lifting the engine and transmission

1 article

• Lifting the engine and transmission 1

Installing the bevel gear

1 article

• Installing the bevel gear 2

Positioning the mobile jack lightly applied under the right side of the sub-frame

1 article

• Positioning the mobile jack lightly applied under the right side of the sub-frame 4

Removing the lifting beams

1 article

• Removing the lifting beams

Installing the coolant hose

1 article

• Installing the coolant hose 4

Installing the battery lead

1 article

• Installing the battery lead 1

Removing components from the transmission

1 article

• Removing components from the transmission 1

Removing screws and nuts from the engine pad and engine stabilizer brace

1 article

• Removing screws and nuts from the engine pad and engine stabilizer brace 2

Preparations when removing transmission

1 article

• Preparations when removing transmission 5

Lowering engine and transmission

1 article

• Lowering engine and transmission 1

Removing the engine and transmission screws

1 article

• Removing the engine and transmission screws