| All-Wheel Final Drive Drain Plug | 26 (35) |
| All-Wheel Final Drive Oil Inspection Plug | 26 (35) |
| ATF Line Connection | 22 (30) |
| ATF Cooler Line-To-Transmission (3.2L) | 18 (25) |
| ATF Cooler Line-To-Transmission | 18 (25) |
| Cardan Shaft-To-Transfer Box (1) |
| Step 1 | 22 (30) |
| Step 2 | Additional 90° Turn |
| Engine Carrier-To-Body (1) |
| Step 1 | 74 (100) |
| Step 2 | Additional 180° Turn |
| Engine Carrier-To-Engine Mount | 44 (60) |
| Exhaust System-To-Cross Member | 17 (23) |
| Hydraulic Mount-To-Carrier Side Section | 17 (23) |
| Steering Column-To-Steering Gear (1) |
| Step 1 | 26 (35) |
| Step 2 | Additional 90° Turn |
| Suspension (Front) Subframe Bolts (1) |
| Step 1 | 74 (100) |
| Step 2 | Additional 180° Turn |
| Torque Support-To-Body | 44 (60) |
| Torque Support-To-Engine | 44 (60) |
| Transfer Case Drain Plug | 15 (20) |
| Transfer Case Inspection Plug | 15 (20) |
| Transfer Case Output Flange Shaft Nut | 89 (120) |
| Transmission Cross Member-To-Body (1) |
| Step 1 | 37 (50) |
| Step 2 | Additional 90° Turn |
| Transmission Drain Plug | 21 (28) |
| Transmission Oil Inspection Plug | 52 (70) |
| Wheel Lug Bolt (2) | 118 (160) |
| INCH Lbs. (N.m) |
| ATF Cooler Line-To-Engine Oil Pan | 53 (8) |
| ATF Cooler Line-To-ATF Thermostat | 89 (10) |
| ATF Cooler Line-To-Engine Oil Pan (3.2L) | 89 (10) |
| ATF Cooler Line-To-ATF Thermostat (3.2L) | 89 (10) |
| ATF Cooler Line-To-Transmission Bell Housing (3.2L) | 89 (10) |
| ATF Filter Bolt | 89 (10) |
| ATF Temperature Sensor | 89 (10) |
| ATF Thermostat-To-Cooler | 31 (3.5) |
| Heat Shield-To-Steering Gear | 89 (10) |
| Multi-Function Switch | 44 (5) |
| Output Shaft Speed Inductive Pickup | 89 (10) |
| Selector Lever Cable-To-Adjustment Part | 89 (10) |
| Selector Lever Frame Bolt | 53 (6) |
| Selector Lever Cable-To-Selector Frame | 89 (10) |
| Selector Shaft-To-Cap Nut | 132 (15) |
| Selector Shaft-To-Nut | 62 (7) |
| Selector Support-To-Body | 53 (6) |
| Transmission Oil Pan Bolt | 89 (10) |
| Transmission Wire Harness | 89 (10) |
| Valve Body Bolt |
| Step 1 | 71 (8) |
| Step 2 | Additional 90° Turn |
| (1) Always replace with NEW fasteners. (2) Thinly grease thread, shank and under head of wheel bolts with Optimoly TA (aluminum paste). DO NOT grease bearing surface of the spherical cap facing the wheel. If heavily contaminated, clean bolts with a lint free cloth. |
