Home ReviewsRefund
Home/Opel/Sintra/Opel Sintra I (1997-1999)/Repair manual/DOHC Petrol Engine/Special Service Tools
Contents Wiring diagrams Section: DOHC Petrol Engine All sections

Special Service Tools Opel Sintra I

DOHC Petrol Engine 8 illustrations

Special Service Tools

KM�135Adapter
To measure engine oil pressure in conjunction with KM�498�B.
KM�194�ESpark Plug Wrench
To remove and install spark plugs.
KM�301Measuring Bar
To check piston protrusion.
KM�340�1�FCutter Set
To cut and rework valve seats.
KM�348Spring Compressor
To compress valve spring in conjunction with KM�653�A.
KM�412Engine Assembly Stand
To hold removed engine.

Special Service Tools

KM�412�8�AAdapter
To hold engine in conjunction with KM�412.
KM�422Installer
To press in camshaft seal ring.
KM�427Remover/Installer
To install centring pins in cylinder block.
KM�470�BAngular Torque Wrench
To tighten cylinder head bolts.
KM�498�BOil Pressure Gauge
To check oil pressure in conjunction with KM�135.
KM�507�CPushing�out tool
To push tie rod head out of steering knuckle.

Special Service Tools

KM�535Installer
To install crankshaft seal ring in conjunction with KM�635.
MKM�571�BDial Gauge
To check various components.
MKM�596�ATemperature Gauge
To measure oil temperature.
MKM�604�DTorx Bit and Socket Set
To remove and install torx bolts.
KM�609Electronics Kit
Diagnosis of electronic and electrical systems.
MKM�610Torque Wrench 1/2" Drive
Measuring range 30�130 Nm.

Special Service Tools

MKM�611Torque Wrench 3/8" Drive
Measuring range 10�60 Nm.
KM�635Installer
To install crankshaft rear seal ring in conjunction with KM�535.
KM�652Fixing Tool
To immobilise flywheel or drive disc.
KM�653�AAdapter
To compress valve spring in conjunction with KM�348.
KM�662�CHolding Wrench
To hold toothed belt pulley when removing and installing fastening bolt.
MKM�667Pressure and Vacuum Pump
To check vacuum units for leaks.

Special Service Tools

MKM�669Torque Wrench 1/2" Drive
Range 50 - 300 Nm.
KM�693�AAssembly Sleeves
To install crankshaft front seal ring.
KM�726�AOil Filter Wrench
To remove and install oil filter.
KM�798Dial Gauge
To measure gear set backlash in conjunction with KM�949.
KM�8056 mm Reamer
To ream valve guide, oversize 0.075 mm.
KM�835�AInstaller
To install valve stem seal.

Special Service Tools

MKM�836Remover
To remove spark plug connectors.
KM�840Remover
To remove valve stem seals.
KM�845Suction Tool
To remove hydraulic valve lifters.
KM�853Immobilising Tool
To immobilise camshaft pulleys.
MKM�883�1Engine Bridge
To hold/lift engine.
MKM�883�2Adapter plate
To align engine in conjunction with MKM�883�1.

Special Service Tools

KM�904Basic Frame
To remove and install various vehicle components with additional adapters.
KM�913�AWrench
To tension/release ribbed V�belt tension roller.
KM�940Centring Tool
To remove and install front axle body in conjunction with KM�904.
KM�942Adapter
To remove and install toothed belt pulley in conjunction with KM�622�C.
KM�943Remover/installer socket
Temperature regulator housing (heat exchanger) oil filter mounting.
KM�947Remover/Installer
To remove oil dipstick guide tube in conjunction with KM�J�7004.

Special Service Tools

KM�949Feeler Gauge
To measure gear set backlash.
KM�2355Socket Wrench T55
To loosen/tighten cylinder head bolts.
KM�J�7004Slide Hammer
To remove oil dipstick guide tube in conjunction with KM�947.
KM�J�34730�91Pressure Tester
To check fuel pressure.
KM�J�37088�ARemover
To disconnect quick�release couplings, fuel lines.

More articles — Engine and Engine Aggregates