Engine Identification
Up to 5 typical design characteristics are used for engine identification. These are explained below using 2 examples.
| Petrol engine (example) | Diesel engine (example) | ||
|---|---|---|---|
| X | Exhaust emission limit | X | Exhaust emission limit |
| 16 | Engine capacity | 20 | Engine capacity |
| X | Compression ratio | D | Mixture system |
| E | Mixture system | T | Special version |
| L | Special version | H | Special version |
Explanation of symbols:
| Exhaust emissions level | C | EC 91/441/EEC | without ECE R 83 A (as R15.04) | |
|---|---|---|---|---|
| X | 94/12/EC or EC 96 | |||
| Engine capacity | Capacity in litres x 0.1 | |||
| Compression ratio ε | L | > 8.5-9.0 : 1 | S | > 9.5-10.0 : 1 |
| N | > 9.0-9.5 : 1 | X | > 10.0-11.5 : 1 | |
| Mixture system | D | Diesel | Z | Single-point fuel injection |
| E | Fuel injection | |||
| Special version (according to need) | H | High output/supercharged | V | Volume model |
| J | Adapted output | T | Turbocharging | |
| L | Low output/supercharging | 2 | Family II engine | |
| R | High power |
4.2 Engine Identification
Illus. L 0470 depicts potential locations for the engine identification.
4.2 Engine Identification
Explanation of markings */ ** and abbreviations (a) / (b):
| * | Engines not for use in the European area are identified with a *. Performance and fuel consumption values are only provided in part, since measuring methods differ from country to country. |
|---|---|
| * * | Performance and fuel consumption values not available by the copy deadline for this brochure are designated with * *. |
| (a) | Also at 40 kW/54 HP at 5400 rpm |
| (b) | Austria: 40 kW/54 HP at 5200 rpm |