Intake Manifold Installation Opel GT II

Intake Manifold Installation

1. Install a NEW intake manifold gasket.
2. Install the intake manifold.
3. Install the intake manifold bolts and nuts.
4. Install the intake manifold brace.
5. Install the intake manifold brace bolt.
6. Connect the rear knock sensor to the intake manifold brace.
7. Install the vacuum pump bracket.
8. Install the vacuum pump bracket bolt and nut.
9. Install the vacuum pump.
10. Install the vacuum pump bolts.
11. Install the throttle body.
12. Install the throttle body bolts.
13. Install the high pressure fuel pump noise insulator.
14. Install the high pressure fuel pump cover.
15. Install the high pressure fuel pump cover bolts.
16. Lubricate the high pressure fuel pump fuel feed line connection threads with clean 5W30 engine oil.
17. Install the fuel feed line.
18. Install the fuel feed line bolts.
19. Connect the low pressure fuel line nut.
20. Install the bypass valve solenoid with hoses.
21. Install the bypass valve solenoid bolts.
22. Connect the bypass valve solenoid hoses and clamps.