Crankshaft Balancer Replacement
Special Tools
| • | J 43653 Flywheel Holding Tool |
| • | J 45059 Angle Meter |
Removal Procedure
- Remove the engine drive belt. Refer to Drive Belt Replacement .
- Remove the starter motor. Refer to Starter Motor Replacement .
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Install the J 43653 (1) to the engine block, in order to hold the flywheel.
- Remove the crankshaft balancer bolt. Discard the bolt.
- Remove the balancer using a universal removal tool.