Home ReviewsRefund
Home/Opel/Combo/Opel Combo C (2002-2011)/Repair manual/OHC Petrol Engine/Cylinder Head Machining Special Tools
Contents Wiring diagrams Section: OHC Petrol Engine All sections

Cylinder Head Machining Special Tools Opel Combo C

OHC Petrol Engine 9 illustrations
KM-113-2Mount for assembly device
KM-301Measuring bridge
KM-340-GValve cutter set
To cut and correct valve seating
KM-340-100Valve cutter set
To cut and correct valve seating
KM-352Installer (8 mm)
To install the valve stem sealing
KM-419Distance gauge
To check valve stem projection
KM-512Distance gauge
To check valve stem projection
KM-515Reamer set (8 mm)
To ream valve guide
MKM-571-BDial gauge
To check installation height of valves, to check swirl chamber projection, to check valve tilt play
KM-654Assembly tool
To remove/install valve guides (15 DT, X 17 DT) 1)
KM-663Installers (7 mm)
To install the valve stem sealing
KM-664Reamer set (7 mm)
To ream valve guide
KM-805Reamer (6 mm)
To ream valve guide
KM-831Reamer set (6 mm)
To ream valve guide (25 DT, X 25 DT) 1)
KM-835-AInstaller (6 mm)
To install valve stem seals
KM-840Remover
To remove valve stem seal
KM-841Plastic guard
To remove / install valve spring and valve (25 DT, X 25 DT) 1)
KM-842Remover
To check cylinder head for leaks (25 DT, X 25 DT) 1)
KM-849Storage facility
Storage facility for pistons, con-rods, valves etc.
KM-946Protective cap
To remove / install valve springs and valve cotters (X 20 DTL, Y 20 DTH / DTL, Y 22 DTH) 1)
KM-958Installer (5 mm)
To install valve stem seals (X 10 XE, X 12 XE) 1)
KM-961Reamer (5 mm)
To ream valve guide (X 10 XE, X 12 XE) 1)
KM-965Reamer (7 mm)
To ream valve guide
KM-6022Reamer (6 mm)
To ream valve guide (X 14 XE, X 16 XE, X 16 XEL) 1)
MKM-6086To install/remove valve cotters (6 mm)
To remove and install valve springs and valve cotters
MKM-6086-200 / 300 / 400To install/remove valve cotters (5, 7, 8 mm)
To remove and install valve springs and valve cotters
KM-6091Installer (6 mm)
To install the valve stem sealing
KM-6093Installer
To install heat sleeve (Y 17 DT) 1)
KM-6094Remover
To remove heat sleeve (Y 17 DT) 1)
KM-6095Installer/remover
To install / remove valve guide (Y 17 DT) 1)
MKM-6152Installer (6 mm)
To install valve stem seals (Z 22 SE)
KM-6167Adapter Set
Assembly device for operations on cylinder head
KM-6171Release tool
To release valve
KM-6215Assembly device
Assembly device for operations on cylinder head
MKM-6216Dial gauge with internal caliper (6 mm)
To check valve guide
MKM-6216-200 / 300 / 400Dial gauge with internal caliper (5, 7, 8 mm)
To check valve guide
KM-6385Installer
Valve shaft seal installation
KM-6386Removal and installation tools
Valve guides, remove and install
KM-6387Adapter
Clamping valve springs with KM-348 (cylinder head removed)

1

) The engine designations indicated are examples.

More articles — Engine and Engine Aggregates