How to Replace the Particulate Filter Temperature Sensor Opel Combo C

Remove

1. 1. Raise vehicle all the way
2. 2. Detach lower engine compartment cover or right engine splash guard
3. 3. Disconnect wiring harness plug for particulate filter temperature sensor (1) • Unclip wiring harness from bracket

4. 4. Unclip wiring harness (7x) • From rear engine damping block • From front axle body • 5x from underbody
5. 5. Remove particulate filter temperature sensor (1) • Unscrew temperature sensor

Install

6. 6. Install particulate filter temperature sensor • Tighten temperature sensor 30 Nm
7. 7. Clip in wiring harness (7x) • 5x to underbody • To front axle body • To engine damping block (rear)
8. 8. Connect wiring harness plug for particulate filter temperature sensor • Clip wiring harness into bracket
9. 9. Install lower engine compartment cover or right engine splash guard
10. 10. Lower vehicle all the way