Recommended Torque Values
Nm
Camshaft housing cover to housing 8
Camshaft pulley to camshaft 45
Engine damping block bracket to engine bracket 60
Engine damping block bracket to support hydraulic pump/compressor 60
Engine damping block to engine damping block bracket 65
Front toothed belt cover to rear toothed belt cover 4
Power steering hydraulic pump shackle to support 18 1)
Power steering hydraulic pump to support 25
Rear toothed belt cover to oil pump and camshaft housing 6 1)
Rear toothed belt cover to oil pump and camshaft housing 12 2)
Ribbed V-belt pulley to toothed belt drive gear 20
Ribbed V-belt pulley with toothed belt drive gear to crankshaft 55 + 45° + 15° 2)3)4)
Ribbed V-belt pulley with toothed belt drive gear to crankshaft 55 2)3)
Ribbed V-belt tensioner to cylinder block 20
Ribbed V-belt tensioner to support 18 1)
Ribbed V-belt tensioner to support 20 2)
Right engine damping block to side member 65 5)
Support to cylinder block 35
Toothed belt drive gear to crankshaft 130 + 40° to 50° 1)
Toothed belt tensioner to oil pump 20
V-belt pulley to toothed belt drive gear 20
V-belt pulley with toothed belt drive gear to crankshaft 55 2)3)
1) C 16 NZ2, 1.8 / 2.0 ltr. engine
2) 1.4 / 1.6 ltr. engine
3) On X 16 SZ check clearance between inductive pulse pick-up and increment disc after installation
4) Use new bolt(s)
5) Recut threads and insert bolts with Locking Compound 15 10 177 (90 167 347)