Checking and Adjusting Operations
Recommended Torque Values
Nm
Alternator to bracket (M8) 30
Alternator to bracket (M10) 40
Camshaft housing cover to housing 8
Coolant pump to cylinder block (M6) 8 1)
Coolant pump to cylinder block (M8) 25 2)
Front toothed belt cover to rear toothed belt cover 4
Oil pressure switch to oil pump 30 1)
Oil pressure switch to oil pump 40 2)
Ribbed V-belt pulley to toothed belt drive gear 20 2)
Ribbed V-belt pulley with toothed belt drive gear to crankshaft 55 + 45° + 15° 1)3)4)
Ribbed V-belt pulley with toothed belt drive gear to crankshaft 55 5)
Shackle to alternator 25
Spark plugs to cylinder head 25
Toothed belt tensioner to oil pump 25
V-belt pulley with toothed belt drive gear to crankshaft 55 1)
1) 1.4 / 1.6 ltr. engine
2) C 16 NZ2, 1.8 / 2.0 ltr. engine
3) Power steering version up to MY '93
4) Use new bolt(s)
5) On X 16 SZ, check clearance between inductive pulse pick-up and increment disc after installation