Compression, Check
Engine at operating temperature
(oil temperature ³ 80 °C/176 °F).
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Remove spark plug connectors using KM-717, remove spark plugs.
Terminal "15" from ignition coil or wiring harness plug (1) from dual spark ignition coil.
If present:
Fuel pump relay - see operation
"Fuel Pump Relay, Remove and Install".
| .P. E3561.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
Note:
Use compression recorder with rubber cone and measuring range to 1750 kPa/17.5 bar.
Operate starter approx. 4 seconds with fully opened throttle valve - engine speed approx. 300 rpm.
Permitted pressure deviation of individual cylinders should not exceed 100 kPa (1 bar).
| .P. D8098.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON09.tif | 0,75 | 0,75 | tiff;; Tighten (Torque) |
Spark plug to cylinder head - 25 Nm/18 lbf. ft.
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Spark plug connector, terminal "15" to ignition coil or wiring harness plug to dual spark ignition coil.
| .P. E3562.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
If present:
Fuel pump relay (1) in socket - see operation
"Fuel Pump Relay, Remove and Install".
| .P. E3716.tif | 9 | 7,5 | tiff;; |