Crank Drive, Cylinder Block
Crankshaft
| Engine | 14 NV, 16 SV, C 16 NZ, | C 16 NZ2, 18 SV, C 18 NZ, |
|---|---|---|
| E 16 NZ, X 16 SZ | E 18 NVR 20 NE, C 20 NE, | |
| C 20 NEF, 20 SEH | ||
| Crankshaft and con-rod bearing journals | ||
| Permissible out-of-round mm | 0.04 | |
| Out-of-round | Permissible radial runout of centre main bearing journal on | |
| mounting the shaft in the cylinder block: | ||
| mm | 0.03 | |
| Permissible end play mm | 0.1 to 0.2 | 0.050 to 0.152 |
| Permissible main bearing play mm | 0.017 to 0.047 | 0.015 to 0.040 |
| Permissible con-rod bearing play mm | 0.019 to 0.071 | 0.006 to 0.031 |
| Permissible con-rod end play mm | 0.07 to 0.24 | 0.07 to 0.24 |