Bypass Valve, Replace
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Oil filter with KM-726 - place collecting basin underneath.
Using tap M10 (3rd stage) cut thread in closure washer, screw in M10 bolt and remove bypass valve from seat.
| .P. E3670.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Bypass valve - with drift (ø approx. 15 mm/0.6 in.) to stop.
Lubricate seal ring.
Oil filter to oil pump/cylinder block - 15 Nm/11 lbf. ft.
Check engine oil level and correct if necessary.
| .P. E3669.tif | 9 | 7,5 | tiff;; |