FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION | |
|---|---|---|
| Crossmember | ||
| Engine rear roll stopper bracket bolt and nut | 58 +/- 7 N. m (43 +/- 5 ft-lb) | |
| Front axle crossmember stay bolt and nut | 83 +/- 12 N. m (61 +/- 9 ft-lb) | |
| Front axle No.1 crossmember bolt and nut | 180 +/- 20 N. m (133 +/- 15 ft-lb) | |
| Lower arm assembly bolt | 165 +/- 15 N. m (122 +/- 11 ft-lb) | |
| Lower arm assembly nut (flange nut, self-locking) | M14 | 165 +/- 15 N. m (122 +/- 11 ft-lb) |
| Lower arm assembly nut (nut, self-locking) | M14 | 65 +/- 6 N. m (48 +/- 4 ft-lb) |
| Power steering gear and linkage bolt | 83 +/- 12 N. m (61 +/- 9 ft-lb) | |
| Power steering gear bracket bolt | M10 | 58 +/- 7 N. m (43 +/- 5 ft-lb) |
| M12 | 83 +/- 12 N. m (61 +/- 9 ft-lb) | |
| Pressure hose clamp bolt and nut | 12 +/- 2 N. m (102 +/- 22 in-lb) | |
| Pressure hose nut | 15 +/- 3 N. m (11 +/- 2 ft-lb) | |
| Return tube clamp bolt and nut | 12 +/- 2 N. m (102 +/- 22 in-lb) | |
| Return tube nut | 15 +/- 3 N. m (11 +/- 2 ft-lb) | |
| Stabilizer bracket bolt | 58 +/- 7 N. m (43 +/- 5 ft-lb) | |
| Stabilizer link nut | 48 +/- 7 N. m (36 +/- 5 ft-lb) | |
| Steering column assembly bolt | 18 +/- 2 N. m (13 +/- 2 ft-lb) | |
| Steering gear and linkage protector bolt <3.8L> | 12 +/- 2 N. m (102 +/- 22 in-lb) | |
| Tie rod end nut | 29 +/- 4 N. m (21 +/- 3 ft-lb) | |
| Engine mounting | ||
| Engine front mounting bracket bolt | M10 | 58 +/- 7 N. m (43 +/- 5 ft-lb) |
| Engine front mounting bracket bolt and nut | M12 | 83 +/- 12 N. m (61 +/- 9 ft-lb) |
| Engine mounting stay bolt <3.8L> | 41 +/- 6 N. m (31 +/- 4 ft-lb) | |
| Grounding cable bolt | 9.0 +/- 2.0 N. m (80 +/- 17 in-lb) | |
| Engine roll stopper and centermember | ||
| Centermember bolt | 83 +/- 12 N. m (61 +/- 9 ft-lb) | |
| Engine front roll stopper bracket bolt and nut | 58 +/- 7 N. m (43 +/- 5 ft-lb) | |
| Engine rear roll stopper bracket bolt and nut | 58 +/- 7 N. m (43 +/- 5 ft-lb) | |
| Transaxle case rear roll stopper bracket bolt | 90 +/- 10 N. m (67 +/- 7 ft-lb) | |
| Transaxle mounting | ||
| Transaxle mounting body side bracket nut (nut, flange) | M12 | 83 +/- 12 N. m (61 +/- 9 ft-lb) |
| Transaxle mounting body side bracket nut (nut, self-locking) | M12 | 58 +/- 7 N. m (43 +/- 5 ft-lb) |
TIGHTENING SPECIFICATIONS