Home ReviewsRefund Car not listed?
Home/Honda/Crosstour/Honda Crosstour I (2012-2012)/Repair manual/Testing & Diagnostics/DTC P2610: PCM Ignition Off Internal Timer Malfunction
Contents Wiring diagrams Section: Testing & Diagnostics All sections

DTC P2610: PCM Ignition Off Internal Timer Malfunction Honda Crosstour I

Testing & Diagnostics ~189 words

Note. Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION (+).

  1. Turn the ignition switch to ON (II).
  2. Clear the DTC with the HAS.
  3. Check for Pending or Confirmed DTCs with the HAS. Is DTC P2610 indicated? YES -Go to next step. NO -Intermittent failure, the system is OK at this time. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.
  4. Update the PCM if it does not have the latest software (see «PCM UPDATE»(ref-360080-S11980508702010042600000) (+) or substitute a known-good PCM (see «SUBSTITUTING THE PCM»(ref-360056-S32194616542010042600000) (+).
  5. Check for Pending or Confirmed DTCs with the HAS. Is DTC P2610 indicated? YES -If the PCM was updated, substitute a known-good PCM (see «SUBSTITUTING THE PCM»(ref-360056-S32194616542010042600000) (+) then recheck. If the PCM was substituted, go to step 1 . NO -If the PCM was updated, troubleshooting is complete. If the PCM was substituted, replace the original PCM (see «PCM REPLACEMENT»(ref-360080-S27881728262010042600000) (+). If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.

More articles — Pgm-Fi System (V6)