Engine Mount Bracket Chrysler Crossfire I final

1. Position the engine mount brackets (2) on the engine block.
2. Install the new bolts (1). Tighten to 20 N.m (15 ft. lbs.) plus 90° clockwise.
3. Install the engine mounts. See «INSTALLATION»(ref-306563-S18996822202008121700000) .

Scheme 87

1. Disconnect the negative battery cable.
2. Remove the air cleaner housing. See «REMOVAL»(ref-306563-S23334034382008121700000) .
3. Attach the engine support frame.
4. Remove the engine mount upper bolt (1) and the heat shield (2). CAUTION: Do not stretch lines and hoses while lifting engine.
5. Raise the engine slightly.
6. Raise and support the vehicle.
7. Remove the lower splash shield screws (1) and the splash shield.
8. Remove the engine mount lower bolt.
9. Remove the engine mount.