Heated oxygen sensor (HO2S), replacing
Special tools
9995543
Note. The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.
Replacing the heated oxygen sensor
Detach the wiring harness from the clip.
Scheme 513
Unplug the connector of the heated oxygen sensor.
Scheme 514
Remove the heated oxygen sensor. Use 9995543
Installing the heated oxygen sensor
Install
- the heated oxygen sensor. Use «9995543»(ref-403953-S02065961212011061000000) . Tighten.
- the wiring harness in the clip.
Plug in the connector of the heated oxygen sensor
Induction pipe, replacing
Operation Number(s): 25102-2
Disconnect power steering pump
Disconnect power steering pump Power steering pump
Scheme 515
Scheme 516
Scheme 517
Scheme 518
Scheme 519
Scheme 520
Scheme 521
Scheme 522
Install the pump power steering
Install pump power steering Power steering pump
Fill the cooling system
Perform filling Cooling system - draining, charging and bleeding