Home ReviewsRefund
Home/Volvo/V70/Volvo V70 II (2000-2004)/Repair manual/Engine Control Systems/Electrical & Engine Control - Specifications (Xc): Other
Contents Wiring diagrams Section: Engine Control Systems All sections

Electrical & Engine Control - Specifications (Xc): Other Volvo V70 II

Engine Control Systems 2 illustrations ~133 words

Heated oxygen sensors (HO2S), removing

  1. For B5xx4T -2004, see «Heated oxygen sensors (HO2S), replacing»(ref-430985-S33960067052011101900000)
  2. For B5xx4T 2005-, see «Heated oxygen sensor (HO2S), replacing»(ref-430985-S28241031382011101900000) .

Scheme 532

Scheme 532: Installing the adapter cable
Scheme 532: Installing the adapter cable

Note. Ensure that the ends of the protective sheath on the adapter cable point downwards so that water does not gather in the protective sheath.

Install

  1. the adapter cable between the existing 4-pin connectors
  2. a tie strap as shown in the illustration.

Scheme 533

Scheme 533
Scheme 533

Install the adapter wiring between the existing 6-pin connectors.

Note. Ensure that the ends of the protective sheath on the adapter cable point downwards so that water does not gather in the protective sheath.

Install

  1. the inlet hose between the air cleaner (ACL) and turbocharger (TC) on the turbocharger (TC)
  2. the air cleaner (ACL) housing.

More articles — Electrical & Engine Control - Specifications (Xc)