Recommended Torque Values (X 20 Dtl, X 20 Dth)
| Nm |
|---|
| Cover to starter | 6 |
| Engine damping block adapter to timing case | 60 |
| Starter to cylinder block | 45 |
| Exhaust manifold to turbocharger | 30 |
| Exhaust manifold to cylinder head | 22 |
| Oil dip stick guide tube attaching strap to cylinder block | 8 |
| Damper to auxiliary aggregates support | 23 |
| Damper to tensioner | 23 |
| Oil filter housing cover to oil filter housing (with plastic cover) | 25 � 30 |
| Oil filter housing cover to oil filter housing (with metal cover) | 20 � 25 |
Recommended Torque Values
| Nm |
|---|
| Timing case cover to timing case | 6 |
| Torsional vibration damper to crankshaft | 150 Nm / 111 lbf. ft. + 45� + 15 |
| Power steering pump pressure line to power steering pump | 35 |
| Duplex chain tensioner to timing case | 60 |
| Dynamic oil level control to oil pan | 8 |
| Upper part of intake manifold to lower part of intake manifold | 8 |
| Lower part of intake manifold to cylinder head | 22 |
| Fuel injection lines to injection pump | 30 |
| Fuel injection lines to injection nozzle traverses | 30 |
| Fuel injection pump to bracket | 20 |
Recommended Torque Values
| Nm |
|---|
| Injection pump to cylinder block | 25 |
| Accelerator with pedal bracket to bulkhead | 20 |
| Flame sensor for heater element in fan motor housing | 2.5 |
| Duplex timing chain guide rail to cylinder block | 8 |
| Simplex timing chain guide rail to cylinder block | 8 |
| Housing cover for fan motor and housing cover for heat exchanger to heater element | 4.5 |
| Housing cover for fan motor and heater element control unit to heater element - hexagon socket bolts | 6 |
| Housing cover for fan motor and heater element control unit to heater element - cross-head bolts | 3.5 |
| Fan motor housing to heat exchanger housing | 6 |
| Alternator to alternator bracket (coolant flange) | 35 |
Recommended Torque Values
| Nm |
|---|
| Glow plugs to cylinder head | 10 |
| Sheathed glow plug for heater element in fan motor housing | 6 |
| Auxiliary aggregate(s) support to cylinder block | 35 |
| Starter bracket to starter | 7 |
| Starter bracket to cylinder block | 25 |
| Fuel injection pump bracket to cylinder block | 20 |
| Alternator bracket to cylinder head | 20 |
| Alternator bracket (coolant flange) to cylinder head | 20 |
| Fuel filter housing bracket to bulkhead | 25 |
| Engine damping block bracket to rear engine damping block | 45 |
Recommended Torque Values
| Nm |
|---|
| Rear engine damping block bracket to transmission | 60 |
| Bracket for front left engine damping block to transmission | 60 |
| Front right engine damping block bracket to engine damping block adapter | 45 |
| Bracket front right engine damping block to bracket | 45 |
| Bracket for front right engine damping block to engine damping block | 45 |
| Heat shields | 8 |
| Crankshaft pulse pick-up to cylinder block | 8 |
| Cable connections to sheathed glow plug for heater element. | 2 |
| Refrigerant lines to condenser block connection | 27 |
| Refrigerant lines to compressor | 33 |
Recommended Torque Values
| Nm |
|---|
| Ribbed V-belt tensioner to auxiliary aggregates support | (M10) 42 / (M8) 23 |
| Fuel filter housing central bolt | 6 |
| Fuel lines to fuel injection pump | 15 |
| Cylinder block coolant flange to cylinder block | 20 |
| Coolant temperature sensor to thermostat housing | 10 |
| Coolant pump to timing case | 20 |
| Crankshaft bearing bridge to crankshaft bearing cover | 20 |
| Crankshaft bearing bridge to cylinder block | 20 |
| Crankshaft bearing cap to cylinder block | 90 Nm / 66 lbf. ft. + 60� + 15� |
| Steering intermediate shaft to steering gear (interior) | 22 Nm / 16 lbf. ft. + 45�+ 15� |
Recommended Torque Values
| Nm |
|---|
| Rear engine damping block to front axle body | 20 |
| Front left engine damping block to bracket | 45 |
| Front left engine damping block to front axle body | 45 |
| Front right engine damping block to side member | 45 |
| Engine transport shackle to cylinder head | 20 |
| Camshaft bearing caps to cylinder head | 15 |
| Camshaft sprocket to camshaft | 90 Nm / 66 lbf. ft. + 60� + 30� |
| Oil drain bolt to oil pan | 10 |
| Oil pressure switch to cylinder block | 30 |
| Oil filter casing to cylinder block | 20 |
Recommended Torque Values
| Nm |
|---|
| Oil pump cover to timing case | 8 |
| Turbocharger oil return line to turbocharger | 8 |
| Turbocharger oil return line to cylinder block | 20 |
| Oil intake pipe to oil pan | 8 |
| Oil injection nozzle to cylinder block | 22 |
| Turbocharger oil feed line to turbocharger | 20 |
| Turbocharger oil feed line to cylinder block | 20 |
| Oil pan to transmission (M10) | 40 |
| Oil pan to timing case (M8) | 20 |
| Oil pan to cylinder block | 20 |
Recommended Torque Values
| Nm |
|---|
| Arm to spring strut support tube | 65 |
| Con-rod bearing cap to con-rod | 35 Nm / 26 lbf. ft. + 45� + 15� |
| Wheel to wheel hub | 110 |
| Pulley to coolant pump | 20 |
| Crankshaft pulley to power steering pump | 20 |
| Shift guide to shift rod | 12 Nm / 9 lbf. ft. + 180� |
| Flywheel to crankshaft | 45 Nm / 33 lbf. ft. + 30� + 15� |
| Coolant temperature sensor to cylinder head | 18 |
| Charge pressure sensor to upper part of intake manifold | 8 |
| Oil temperature sensor to oil pan | 18 |
Recommended Torque Values
| Nm |
|---|
| Simplex fuel injection pump gear to fuel injection pump flange | 28 |
| Simplex chain tensioner to cylinder head | 60 |
| Timing case to cylinder block | 20 |
| Timing chain tension rail to cylinder block | 20 |
| Exhaust manifold support to exhaust manifold and cylinder block | 25 |
| Thermostat housing (radiator) to cylinder head | 8 |
| Thermostat housing (heat exchanger) to cylinder block | 20 |
| Injection nozzle traverse to cylinder head | |
| Turbocharger to exhaust manifold | 30 |
| Return manifold to turbocharger | 30 |
Recommended Torque Values
| Nm |
|---|
| Switchover valve vacuum unit to lower part of intake manifold | 8 |
| Brake servo vacuum line to vacuum pump | 18 |
| Vacuum pump to cylinder head | 8 |
| Compressor to ancillary component support | 20 |
| Closure plug for oil pressure regulation valve to timing case | 60 |
| Safety valve closure plug to timing case | 45 |
| Front axle body to chassis | 100 Nm / 74 lbf. ft. + 45� + 15� |
| Front exhaust pipe to muffler | 12 |
| Front exhaust pipe to return manifold | 20 |
Recommended Torque Values
| Nm |
|---|
| Heat exchanger to oil filter housing | 20 |
| Heater element to heater element bracket | 7 |
| Cylinder head to timing case | 20 Nm / 15 lbf. ft. + 30� + 5� |
| Cylinder head to cylinder block | 25 Nm / 18.5 lbf. ft. + 65� + 65� + 65� +65� + 15� |
| Cylinder head cover to cylinder head | 8 |
