Checking and Adjustment Values (X 17 Dt)
| Engine | | X 17 DT (TC 4 EE 1) |
|---|
| Valve clearance (cold) | | |
| Intake | mm | 0.15 |
| Exhaust | mm | 0.25 |
| Adjustment | | By exchanging shims |
| Compression pressure | | 1850 - 3450 (18.5 - 34.5) The pressure difference between the individual cylinders of the entire engine should not amount to more than 150 kPa (1.5 bar). |
| Pressure loss check | | Max. pressure loss 25% per cylinder |
| Cold start acceleration Distance between idle stop screw and adjustment lever | | |
| at -20 �C | mm | 1.7 + 1.0 |
| at +20 �C | mm | 0.8 + 0.3 |
| Idle speed | | |
| Engine warm | rpm | 950 � 1000 |
| Engine cold | rpm | 780 � 880 |
| Cut off speed | rpm | 5100 � 5300 |
| Charge pressure | kPa (bar) | 72 (0.72) at 4400 rpm |
