Recommended Torque Values (X 17 Dt)
| Nm |
|---|
| Exhaust pipe to return manifold | 65 |
| Starter to transmission | 38 |
| Connecting pieces, oil feed line to turbocharger | 41 |
| Thermostat connection port to cylinder head | 30 |
| Camshaft drive gear to camshaft | 10 |
| Coolant pump pulley to coolant pump | 10 |
| Exhaust manifold to cylinder head | 24 |
| Thermostat housing cover to thermostat housing | 24 |
| Intake manifold to cylinder head | 24 |
| Injector nozzle to injector nozzle holder | 45 |
Recommended Torque Values
| Nm |
|---|
| Injection line to injection pump and injector nozzle holder | 25 |
| Injection pump to cylinder block | 23 |
| Injection pump drive gear to injection pump | 69 |
| Bleeder screw to injection pump | 20 |
| Accelerator pedal to bulkhead | 20 |
| Alternator to alternator bracket (M8) | 24 |
| Alternator to alternator bracket (M10) | 48 |
| Glow plugs to cylinder head | 20 |
| Alternator support to cylinder block | 48 |
| Power steering pump main bracket to cylinder block | 48 |
Recommended Torque Values
| Nm |
|---|
| Compressor main bracket to cylinder head | 48 |
| Bracket, injector nozzle, to cylinder head | 50 |
| Injection pump bracket to injection pump | 40 |
| Injection pump bracket to injection pump | 40 |
| Fuel injection pump bracket to cylinder block | 39 |
| Alternator bracket to cylinder block | 38 |
| Bracket, crankshaft rear seal ring to cylinder block | 10 |
| Engine damping block bracket to rear engine damping block | 45 |
| Bracket, front left engine damping block to transmission | 60 |
| Power steering pump bracket to bracket (cylinder head) | 48 |
Recommended Torque Values
| Nm |
|---|
| Rear engine damping block bracket to transmission | 60 |
| Rear toothed belt cover to cylinder head and cylinder block | 8 |
| Heat shield to exhaust manifold | 8 |
| Refrigerant line to expansion valve | 10 |
| Refrigerant line to compressor | 20 |
| Clamp to shift linkage | 12 Nm / 9 lbf. ft. + 180� |
| Fuel return line to injector nozzle holder | 29 |
| Coolant line to turbocharger | 8 |
| Coolant pump to cylinder block | 20 |
| Crankshaft bearing cap to cylinder block | 88 |
Recommended Torque Values
| Nm |
|---|
| Charge air pipe to cylinder head | 18 |
| Steering intermediate shaft to steering gear (interior) | 22 Nm / 16 lbf. ft. + 45� + 15� |
| Air intake hose to cylinder block | 18 |
| Engine damping block to wheel housing | 45 |
| Rear engine damping block to front axle body | 20 |
| Front left engine damping block to front axle body | 45 |
| Camshaft bearing caps to cylinder head | 19 |
| Upper engine damping block bracket to engine damping block | 45 |
| Upper engine damping block bracket to lower engine damping block bracket | 45 |
| Oil drain bolt to oil pan | 78 |
Recommended Torque Values
| Nm |
|---|
| Oil pressure regulating valve to cylinder block | 40 |
| Oil pressure switch to cylinder block | 20 |
| Oil filter to oil cooler | 15 |
| Oil cooler to cylinder block (hollow bolt) | 49 |
| Oil line to vacuum pump | 15 |
| Oil pump drive gear to oil pump | 44 |
| Oil pump cover to cylinder block | 10 |
| Oil pump intake pipe to cylinder block | 19 |
| Oil baffle to cylinder block | 19 |
| Oil feed line to cylinder block pipe connection | 28 |
Recommended Torque Values
| Nm |
|---|
| Oil feed line to turbocharger | 20 |
| Upper part of oil pan to cylinder block | 10 |
| Lower part of oil pan to upper part of oil pan | 10 |
| Con-rod bearing cap to con-rod | 25 Nm / 18 lbf. ft. + 100� + 15� |
| Crankshaft pulley to crankshaft | 20 |
| Flywheel to crankshaft | 30 Nm / 22 lbf. ft. + 45� to 60� |
| Temperature sensor in thermostat housing | 8 |
| Temperature switch in thermostat housing | 10 |
| Thermostat housing to cylinder head | 24 |
| Turbocharger to exhaust manifold | 27 |
Recommended Torque Values
| Nm |
|---|
| Turbocharger support to cylinder block | 51 |
| Safety valve to intake manifold | 49 |
| Safety valve to cylinder block | 39 |
| Lower engine damping block bracket to cylinder block | 60 |
| Return manifold to turbocharger | 27 |
| Vacuum pump to alternator | 7 |
| Front axle body with new fastening bolts to chassis | 100 Nm / 74 lbf. ft. + 45� + 15� |
| Coolant pipe to cylinder block | 95 |
Recommended Torque Values
| Nm |
|---|
| Toothed belt drive gear to crankshaft | 196 |
| Toothed belt tension roller to cylinder block | 19 |
| Toothed belt guide roller to cylinder block | 76 |
| Cylinder head to cylinder block | 40 Nm / 30 lbf. ft. + 60� to 75� + 60� to 75� |
| Cylinder head cover to cylinder head | 8 |
