Remove
- 1. Open bonnet
- 2. Completely disconnect battery • Detach earth connection from earth terminal – Slacken nut • Detach positive connection from positive terminal – Slacken nut
- 3. Remove battery • Remove battery bracket – Unscrew bolt • Remove battery
- 4. Raise vehicle by its full height
- 5. Place collecting basin underneath.
- 6. Drain coolant • Open drain bolt on radiator (1) • Collect coolant • Close drain bolt
- 7. Lower vehicle completely
- 8. Remove coolant compensation tank • Detach 3x coolant hose (1) – Undo 3x clamps • Unclip retainer (2)
Install
- 9. Install coolant expansion tank • Attach 3x coolant hoses – Attach 3x clamps • Clip in retainer
- 10. Top up coolant • Observe specified coolant quantity
Note. Fill and bleed cooling system
- 11. Install battery • Install battery bracket – Tighten bolt 7 Nm
- 12. Completely connect battery • Attach ground connection to ground terminal – Tighten nut • Attach positive connection to positive terminal – Tighten nut
- 13. Program volatile memories
- 14. Close bonnet