Remove
- 1. Remove engine cover.
- 2. Raise vehicle by its full height
- 3. Place collecting basin underneath.
- 4. Unscrew coolant pump coolant drain bolt (arrow)
- 5. Lower vehicle by its full height
- 6. Drain coolant • Unscrew closure cap of coolant expansion tank
Note. Opening the coolant compensation tank accelerates coolant drainage
- 7. Detach lower coolant hose (1) • From thermostat
- 8. Remove thermostat • Unscrew 2x bolts (2) • Remove seal ring
- 9. Clean sealing surfaces.
Install
- 10. Install thermostat • Replace sealing ring • Tighten 2x bolt 8 Nm
Note. Coat seal ring lightly with silicone grease (white)
- 11. Attach lower coolant hose
- 12. Raise vehicle by its full height
- 13. Tighten coolant pump coolant drain bolt 20 Nm • Insert bolt with commercially available Teflon strip
- 14. Lower vehicle by its full height
- 15. Attach engine cover
- 16. Fill and bleed cooling system