Input Shaft Speed Sensor Replacement Opel Agila B

Remove

1. 1. Disconnect battery negative lead • Release nut
2. 2. Disconnect harness connector (1) from input shaft speed sensor
3. 3. Remove input shaft speed sensor (2) from transmission • Remove bolt (3)

Install

4. 4. Install new input shaft speed sensor (2) to transmission • Install new O ring to input shaft speed sensor – Apply suitable lubricant to O ring • Install bolt (3) 5.5 Nm
5. 5. Connect harness connector (1) to input shaft speed sensor

6. 6. Connect battery negative lead • Secure nut 11 Nm
7. 7. Program all volatile memories – see operation “Program Volatile Memories”