Power Window Control System: Removal & Installation Nissan Pathfinder III рестайлинг

INSTALLATION

Installation is in the reverse order of removal.

Scheme 61

1. Using a suitable tool, release the metal clip and pawls, then lift the front power window and door lock/unlock switch and finisher upward as an assembly from the door finisher. CAUTION: Wrap a cloth around suitable tool to protect components from damage.
2. Disconnect the harness connector, then remove the assembly from front door finisher.
3. Release the four tabs (A), two on each side, then separate the front power window and door lock/unlock switch (1) from the switch finisher (2).

Installation is in the reverse order of removal.

Scheme 62

1. Using a suitable tool, release the metal clip and pawls, then lift the rear power window switch and finisher (2) upward as an assembly from the rear door finisher. CAUTION: Wrap a cloth around suitable tool to protect components from damage.
2. Disconnect the harness connector, then remove the assembly from the rear door finisher.
3. Release the two tabs (A), one on each side, then separate the rear power window switch (1) from the rear power window switch finisher (2).

Installation is in the reverse order of removal.