Home ReviewsRefund Car not listed?
Home/Infiniti/M37/Infiniti M37 IV (2010-2014)/Repair manual/Collision/avoidance/Driver Assistance System (Ldw & Ldp): Removal & Installation
Contents Wiring diagrams Section: Collision/avoidance All sections

Driver Assistance System (Ldw & Ldp): Removal & Installation Infiniti M37 IV

Collision/avoidance

REMOVAL

  1. Remove headlining assembly. Refer to " «REMOVAL AND INSTALLATION»(ref-573586-S41467269982013082200000) ".
  2. Remove the bolts.
  3. Remove lane camera unit.

INSTALLATION

Install in the reverse order of removal.

CAUTIONRemove the camera lens cap for replacement. Never give an impact to the lane camera unit. Perform the camera aiming every time the lane camera unit is removed and installed. Refer to " DESCRIPTION ".
  1. Remove the instrument lower panel LH. Refer to " «REMOVAL AND INSTALLATION»(ref-573601-S33748281932013082200000) ".
  2. Remove warning systems switch from instrument lower panel LH.

Note. Warning systems switch and VDC OFF switch are integrated.

Install in the reverse order of removal.

  1. Remove the AV control unit. Refer to " «REMOVAL AND INSTALLATION»(ref-573616-S33792141322013082200000) ".
  2. Remove the screw.
  3. Remove warning buzzer.

Install in the reverse order of removal.

More articles — Driver Assistance System (Ldw & Ldp)