Home ReviewsRefund
Home/Infiniti/M37/Infiniti M37 IV (2010-2014)/Repair manual/Collision/avoidance/Driver Assistance System (Dca): Removal & Installation
Contents Wiring diagrams Section: Collision/avoidance All sections

Driver Assistance System (Dca): Removal & Installation Infiniti M37 IV

Collision/avoidance

REMOVAL

  1. Remove engine under cover. Refer to " «ENGINE UNDER COVER: REMOVAL AND INSTALLATION»(ref-573585-S39831325782013082200000) ".
  2. Remove bolts of the left fender protector (front) front side. Refer to " «FENDER PROTECTOR: REMOVAL AND INSTALLATION»(ref-573585-S27718467922013082200000) ".
  3. Remove bolts of condenser side seal lower (LH) lower side to obtain space for work. Refer to " «REMOVAL AND INSTALLATION»(ref-573600-S13026044042013082200000) ".
  4. Disconnect ICC sensor connector.
  5. Remove mounting bolts from ICC sensor.
  6. Remove ICC sensor.

INSTALLATION

Install in the reverse order of removal.

CAUTIONAlways perform the laser beam aiming adjustment and check the operation after the replacement, removal, and installation of ICC sensor. Refer to " DESCRIPTION ".

More articles — Driver Assistance System (Dca)