Home ReviewsRefund
Home/Audi/TT/Audi TT 8N (1998-2003)/Repair manual/Exhaust/Speed and Idle Control
Contents Wiring diagrams Section: Exhaust All sections

Speed and Idle Control Audi TT 8N

Exhaust
DTCError MessageDiagnostic ProcedureMalfunction Criteria and Threshold ValueSecondary Parameters with Enable ConditionsMonitoring Time LengthFrequency of checks, MIL Illumination
P0501Vehicle Speed Sensor A Range/PerformanceCheck the vehicle speed signal. Refer to --> Speed Signal, Checking .Comparison with engine speed and deceleration fuel cut-off VSS signal, 3 km/hFuel cut off, 4 Sec. Engine speed, 1520-4520 RPM5 Seconds2 DCY
P0506Idle Air Control System RPM Lower Than ExpectedCheck the Throttle Valve Control Module J338. Refer to --> Throttle Valve Control Module J338 , CheckingIdle controller at min value - -10.0% And Idle correction deviation -100 RPMEngine speed, Idle Vehicle speed, 0 km/h Engine temp, >40°C EVAP purge flow, 10% Altitude, 2800 m No fuel cut off IAT, >-9.7°C5 Seconds2 DCY
P0507Idle Air Control System RPM Higher Than ExpectedCheck the Throttle Valve Control Module J338. Refer to --> Throttle Valve Control Module J338 , CheckingIdle controller at max value - >7.0% And Idle correction deviation >+100 RPMEngine load, 23% Engine speed, Idle Vehicle speed, 0 km/h Engine temp, >40°C EVAP purge flow, 10% Altitude, 2800 m No fuel cut off IAT, >-9.7°C5 Seconds2 DCY

More articles — 3.2L V6 4V Generic Scan Tool, Engine(s) Code: Bhe