Description
When the Engine Control Module (ECM) recognizes an emission related fault it turns on the Malfunction Indicator Lamp (MIL) or if a Electronic Throttle Malfunction is recognized, the Engine Control Module (ECM) turns on the Electronic Power Control (EPC) Warning Lamp which are both located in the instrument cluster.
Diagnostic Mode 03 is used to retrieve and view any DTC which may be stored in the Engine Control Module (ECM).
The DTCs are sorted by SAE code with the DTC tables consisting of a 5-digit alphanumeric value.
Note. Depending on scan tool and protocol used, diagnostic mode 03 and the information provided may be referred to by a different name.
The following tables provide a breakdown and explanation of the DTC code.
P-Codes
| Component group | |||||
|---|---|---|---|---|---|
| P | X | X | X | X | DTC for the drivetrain |
| Norm-Code | |||||
| P | 0 | X | X | X | Trouble codes defined by SAE with specified malfunction texts |
| P | 1 | X | X | X | Additional emission relevant DTCs provided by the manufacturer |
| P | 2 | X | X | X | DTCs defined by SAE with specified texts, from MY 2000 |
| P | 3 | X | X | X | Additional emission relevant DTCs provided by the manufacturer from MY 2000 |
| Component group | |||||
|---|---|---|---|---|---|
| Repair group | |||||
| P | X | 0 | X | X | Fuel and air mixture and additional emission regulations |
| P | X | 1 | X | X | Fuel and air ratios |
| P | X | 2 | X | X | Fuel and air ratios |
| P | X | 3 | X | X | Ignition system |
| P | X | 4 | X | X | Additional exhaust system |
| P | X | 5 | X | X | Speed and idle control |
| P | X | 6 | X | X | Control module and output signals |
| P | X | 7 | X | X | Transmission |
| P | X | 8 | X | X | Transmission |
| P | X | 9 | X | X | Control modules, input and output signals |
U-Codes
| Component group | |||||
|---|---|---|---|---|---|
| U | X | X | X | X | DTC for network (CAN bus) |
| Norm-Code | |||||
| U | 0 | X | X | X | Trouble codes defined by SAE with specified malfunction texts |