Home/Audi/TT/Audi TT 8N (1998-2003)/Repair manual/Exhaust/02E Transmission

Contents

Wiring diagrams Section: Exhaust

All sections

02E Transmission Audi TT 8N

Exhaust

DTC	Error Message	Diagnostic Procedure	Malfunction Criteria and Threshold Value	Secondary Parameters with Enable Conditions	Monitoring Time Length	Frequency of checks, MIL Illumination
P2714	Pressure Control Solenoid D Performance or Stuck off	Replace the Direct Shift Gearbox (DSG) Mechatronic J743. Refer to 35 GEARS, SHAFTS .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.03 Seconds	Continuous 2 DCY
P2715	Pressure Control Solenoid D Stuck On	Replace the Direct Shift Gearbox (DSG) Mechatronic J743. Refer to 35 GEARS, SHAFTS .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.03 Seconds	Continuous 2 DCY
P2716	Pressure Control Solenoid D Electrical	Replace the Direct Shift Gearbox (DSG) Mechatronic J743. Refer to 35 GEARS, SHAFTS .	Current higher or lower than threshold, (850-120) mA	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.03 Seconds	Continuous 2 DCY
P2723	Pressure Control Solenoid E Performance or Stuck off	Replace the Direct Shift Gearbox (DSG) Mechatronic J743. Refer to 35 GEARS, SHAFTS .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.05 Seconds	Continuous 2 DCY
P2724	Pressure Control Solenoid E Stuck On	Replace the Direct Shift Gearbox (DSG) Mechatronic J743. Refer to 35 GEARS, SHAFTS .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.05 Seconds	Continuous 2 DCY
P2732	Pressure Control Solenoid F Performance or Stuck off	Replace the Direct Shift Gearbox (DSG) Mechatronic J743. Refer to 35 GEARS, SHAFTS .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.05 Seconds	Continuous 2 DCY
P2733	Pressure Control Solenoid F Stuck On	Replace the Direct Shift Gearbox (DSG) Mechatronic J743. Refer to 35 GEARS, SHAFTS .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.05 Seconds	Continuous 2 DCY