DIGITAL COMPASS, CALIBRATING
It is necessary to calibrate the digital compass if
- Compass directions are not correct.
- The letter "C" instead of a direction will appear or the display will be blank.
- A new automatic dimming interior rearview mirror -Y7- is installed.
The digital compass may also need to be calibrated if
- The vehicle battery was reconnected after being disconnected for an extended period
- A new audio system or audio system component was installed.
Digital Compass, Calibrating
Turn on the ignition.
- The letter "C" must appear in the display -1-.
If the letter "C" does not appear, press the button -2- for 9 to 12 seconds until the "C" appears in the compass display.
Drive in a circle two to three times at about 10 km/h (5 mph) until a direction is shown in the compass display.
The interior rearview mirror automatic dimming function is reactivated after the calibration is complete. Refer to AUTOMATIC-DIMMING FUNCTION, SWITCHING ON AND OFF .