Home ReviewsRefund
Home/Subaru/Outback/Subaru Outback BH (1999-2003)/Repair manual/Automatic Trans/A/t Control Systems: Overhaul
Contents Wiring diagrams Section: Automatic Trans All sections

A/t Control Systems: Overhaul Subaru Outback BH

Automatic Trans

ASSEMBLY

  1. Clean all parts before assembly.
  2. Apply grease [MULTEMP AC-D or equivalent] to each parts. See «AT SELECT LEVER»(ref-175339-S08291094912005042000000) .
  3. Assembly is in the reverse order of disassembly.
  4. After completion of fitting, transfer selector lever to range "P" - "1", then check whether the indicator and selector lever agree, whether operating force is.

More articles — A/t Control Systems