Electrical Window Winder - Window Winder Rear Malfunction
Models:
Omega-B 2000-2001
Engines:
All
Option:
Electrical Window Winders
Group:
C - Equipment/Windows/Seats
Troublecode:
Non
Complaint:
No/Poor Function
Window winder rear returns from the closed position.
Cause:
The glued guide rail sash window rear door sticks up at the upper edge (glider) and strikes window guide. This activates the jamming protection.
Production Solution:
Remedy:
Special Part:
Kein
Dress frame sash window rear door and grease the seal sash window rear door.
Working Procedure:
1.��� Lower sash window rear door.
2.��� Remove seal sash window rear door (Picture I) .
3.��� Close sash window till about 5 cm below the "closed" position.
Note:
������ Picture I shows the position of the sash window at bend/ lay the upsticking upper edge sash window.
4.��� Illuminate glued guide rail sash window rear door with lamp and bend / lay the up sticking upper edge with KM-347 towards sash window (pic. II, arrow) .
5.��� Lower sash window rear door and install seal sash window rear door.
6.��� Grease inner side of seal sash window rear door with Silicone grease.
7.��� Perform functional test.
Parts:������������������������������������������������������������������������������������� Part-No.:���������������������� Cat.-No.:
Silicone grease 100g������������������������������������������������������������ 90167353��������������������� 19 70 206
Labour times:������������������������������������������������������������������������������������������������������������� TC:���������������������� Hours:
T 8 136 50����������������������������� Dress frame sash window rear������������������������������������ 90������������������������ 0.2
The regular warranty procedure should be used for claiming set-up-time.