Contents Wiring diagrams Section: Electrical Window Winders All sections

Ecww, Checking Program Test Step 3 Opel Omega B

ECWW, Checking Program

TestTest EquipmentCheckNotesNominal
StepMultimeterValue
MKM-587-Aofbetween
3Ohmmeter, range

200 W

Standby for ECWW in ECWW switch S37 (centre console)6-pin Ter. 5 (BR)Ground· Disconnect 6-pin console wiring harness plug

· Measurement between 6-pin wiring harness plug (body side) and body ground

approx.
0 W
6-pin Ter. 5 (BR)9-pin Ter. 9 (GRWS)· Disconnect 9-pin console wiring harness plug

· Open front left door

approx.
0 W
6-pin Ter. 5 (BR)9-pin Ter. 8 (GR)· Measurement between 6-pin and 9-pin wiring harness plugs

(body side of each)

approx.
0 W
Voltmeter, range
20 V, DCStandby for ECWW in ECWW switch S37 (centre console)6-pin/ Ter. 5 (BR)9-pin/ Ter. 4 (RT)· Measurement between 6-pin and 9-pin wiring harness plugs (body side of each)
greater than
11.5 V
6-pin/ Ter. 5 (BR)9-pin/ Ter. 6 (SW)· Ignition ON

· Measurement in 6-pin and 9-pin wiring harness plugs

(body side of each)

greater than
11.5 V
· After measurement, ignition OFF
Possible Faults:

(If nominal value is not attained)

Measurement between 6-pin console wiring harness plug and body ground:

· Interruption in body wiring harness between body ground and 6-pin wiring harness plug Ter. 5.

· Ground connection corroded.

Measurement between 6-pin and 9-pin console wiring harness plugs or in 6-pin wiring harness plug:

· Fuse F1 defective.

· Interruption in instrument panel wiring harness between fuse F1 and instrument panel/body wiring harness plug X1/Ter. 12.

· Fuse F7 defective.

· Interruption in instrument panel wiring harness between fuse F15 and instrument panel/body wiring harness plug X1/Ter. 49

· Instrument panel/body wiring harness plug X1 detached.

· Interruption in body wiring harness between instrument panel/body wiring harness plug X1 and 6-pin console wiring harness plug Ter. 5.

· Interruption in body wiring harness between instrument panel/body wiring harness plug and 9-pin console wiring harness plug Ter. 4.

· Interruption in body wiring harness between 9-pin console wiring harness plug and door contact switch S47.

· Driver's door contact switch S47 defective.

· Ground connection corroded.

If nominal values are attained, window winder automatic controls S37.7 in switch S37 defective.