Programming the Window Winder Electronics
After replacement, adjustment or function checks of the ECWW and/or reconnection of the battery, the window winder electronics of the ECWW must be reprogrammed:
· After switching on the ignition, close the window completely by keeping the relevant rocker key pressed.
· When the window is closed, keep the rocker key pressed for approx. 5 seconds longer.
The window winder electronics are now programmed.
Note:
If the window is already closed when programming commences, it is enough to press the rocker key for a period of approx. 5 seconds.
Important:
Before replacing a motor/electronics unit, check that the relevant sash window can move easily in its guide.
This is necessary if...
· a window can only be opened or closed by pressing the rocker key constantly and programming is not possible,
· the screen only moves jerkily by approx. 40 mm/1.5 in. despite constant actuation of the rocker key, or
· the pinch guard does not react according to the function description.