Home ReviewsRefund
Home/Opel/Campo/Opel Campo I (1992-2011)/Repair manual/Engine Electrics/Starter Remove and Install
Contents Wiring diagrams Section: Engine Electrics All sections

Starter Remove and Install Opel Campo I

Engine Electrics 2 illustrations

Remove

Clutch slave cylinder from transmission – two bolts tie slave cylinder to chassis.

Remove

Harness connectors from terminals B and S of starter solenoid switch.

Starter from engine.

Install

Starter to engine - bolts 69 Nm wiring connectors to terminals S and B - 9 Nm.

Clutch slave cylinder to engine - bolts.

  • 4JA1T/4JA1TC engine 28 Nm.
  • 4JG2T engine 45 Nm.

More articles — Engine and Engine Aggregates