On-Board Diagnostic - Automatic Transaxle [FS5A-EL]: Other Mazda 3 BM

Clearing DTCs Procedure

1. Connect the M-MDS(IDS) to the DLC-2. (Схема №6): Identifying Data Link Connector (DLC-2)
2. After the vehicle is identified, select the following items from the initialization screen of the IDS. Select "Self Test". Select "Modules". Select "TCM".
3. Verify the DTC according to the directions on the screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Switch the ignition to off.
6. Switch the ignition to ON and wait for 5 s or more.
7. Perform DTC inspection. (See «READING DTCS PROCEDURE»(ref-579439-S13719432922013100700000).)
8. Verify that no DTCs are displayed.