Automatic Transaxle Control System: Overhaul Kia Sedona II

REASSEMBLY

1. Grease the tube (B) and install the lever (A) by tightening the bolt (C). TORQUE: 8-12 N.m (80-120 kgf.cm, 5.8-8.7 lb-ft)
2. Install the lever assembly (B) by tightening the bolt (A). TORQUE: 8-12 N.m (80-120 kgf.cm, 5.8-8.7 lb-ft)
3. Install the solenoid (B) and solenoid lever (A).
4. Install the switch assembly (A) and "P" position switch assembly. TORQUE: 1.3-1.9 N.m (13-19 kgf.cm, 0.95-1.38 lb-ft)
5. Connect the solenoid connector (A) and install the indicator panel (B).
6. Install the shift lever knob (A) by tightening the two screws. TORQUE: 2-3 N.m (20-30 kgf.cm, 1.45-2.18 lb-ft)
7. Install both sides of the brackets. TORQUE: 16-23 N.m (160-230 kgf.cm, 11.6-16.7 lb-ft)
8. Install the adjusting pedal relay (A) to the bracket.