Home ReviewsRefund
Home/Kia/Sedona/Kia Sedona II (2005-2010)/Repair manual/Automatic Trans/Automatic Transaxle Control System: Removal & Installation
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transaxle Control System: Removal & Installation Kia Sedona II

Automatic Trans

INSTALLATION

  1. Install the shift cable mounting nut (A) and cap (B). TORQUE: 10-14 N.m (100-140 kgf.cm, 7.3-10.2 lb-ft)
  2. Install the shift lever assembly mounting nuts (A). TORQUE: 19-24 N.m (190-240 kgf.cm, 13.8-17.5 lb-ft)
  3. Connect the connector (A).
  4. Install the front console cover (A), (see «INTERIOR»(ref-269624) )
  5. Install the console upper cover (A). (see «INTERIOR»(ref-269624) ).

More articles — Automatic Transaxle Control System