DTC P0106: MANIFOLD ABSOLUTE PRESSURE SENSOR (EGR SYSTEM CIRCUIT OPEN/SHORT) Kia Optima I рестайлинг

Note. Before performing any diagnostic test, refer toWARNINGS, CAUTIONS and NOTES in DIAGNOSTIC TESTS .

Note. Testing individual components does not isolate shorts or opens. Perform all voltage tests using a Digital Volt-Ohmmeter Meter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure. Use ohmmeter to isolate wiring harness shorts or opens.

Diagnostic Aids

Malfunction code will set when Manifold Absolute Pressure (MAP) sensor output voltage has been 4.6 volts or less (corresponding to an absolute pressure of 17 psi [118 kPa] or less) for 4 seconds. Check for following possible problems

1. Open or short to ground between Manifold Absolute Pressure (MAP) sensor and Engine/Transaxle Control Module (E/TCM) or Engine Control Module (ECM).
2. Open between MAP sensor and E/TCM or ECM.
3. Open between MAP sensor and ground.
4. Faulty MAP sensor.