Home ReviewsRefund
Home/Ford/Taurus/Ford Taurus IV рестайлинг (2004-2006)/Repair manual/Ignition System/Engine Ignition System - 3.0L (4V): Removal & Installation
Contents Section: Ignition System All sections

Engine Ignition System - 3.0L (4V): Removal & Installation Ford Taurus IV рестайлинг

Ignition System

Removal and Installation

  1. Remove the ignition coil-on-plugs. For additional information, refer to «IGNITION COIL-ON-PLUG - LH»(ref-233740-S17311074002006052600000) and «IGNITION COIL-ON-PLUG - RH»(ref-233740-S26569300802006052600000) .
  2. Remove the LH and RH spark plugs.
  3. Inspect the spark plugs. For additional information, refer to «ENGINE SYSTEM-GENERAL INFORMATION»(ref-233705) .
  4. To install, reverse the removal procedure.
  5. Adjust the plug gap as necessary.

More articles — Engine Ignition System - 3.0L (4V)