Home ReviewsRefund
Home/Ford/Taurus/Ford Taurus IV рестайлинг (2004-2006)/Repair manual/Ignition System/Engine Ignition System - 3.0L (2V): Other
Contents Section: Ignition System All sections

Engine Ignition System - 3.0L (2V): Other Ford Taurus IV рестайлинг

Ignition System 1 illustration

Material

ItemSpecification
Silicone Brake Caliper Grease and Dielectric Compound XG-3-AESE-M1C171-A

MATERIAL SPECIFICATION

ItemSpecification
Silicone Brake Caliper Grease and Dielectric Compound XG-3-AESE-M1C171-A

MATERIAL SPECIFICATION

Scheme 6

Scheme 6: Removal and Installation
Scheme 6: Removal and Installation
  1. Using the special tool, with a twisting motion pull the spark plug wire off the spark plug.
  2. Remove the spark plug.
  3. Inspect the spark plug firing tip. For additional information, refer to «ENGINE SYSTEM-GENERAL INFORMATION»(ref-233705) .
  4. Adjust the spark plug gap as necessary.
  5. To install, reverse the removal procedure.

More articles — Engine Ignition System - 3.0L (2V)