Home ReviewsRefund
Home/Ford/Taurus/Ford Taurus IV рестайлинг (2004-2006)/Repair manual/Ignition System/Engine Ignition System - 3.0L (2V): Removal & Installation
Contents Section: Ignition System All sections

Engine Ignition System - 3.0L (2V): Removal & Installation Ford Taurus IV рестайлинг

Ignition System 2 illustrations

Removal and Installation

CAUTIONSpark plug wires must be connected to the correct ignition coil terminal.
CAUTIONIt is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wire.

Scheme 3

Scheme 3
Scheme 3

Scheme 4

Scheme 4
Scheme 4
  1. Using the special tool, with a twisting motion pull the spark plug wire off the spark plug.
  2. Disconnect the spark plug wire from the ignition coil by twisting while pulling upward.
  3. Open the spark plug wire separators and remove the spark plug wire.
  4. To install, reverse the removal procedure.

More articles — Engine Ignition System - 3.0L (2V)