DISASSEMBLY
| WARNING | Before beginning any service procedure, refer to HEALTH AND SAFETY PRECAUTIONS Safety Warnings in information 100-00 General Information. Failure to follow this instruction may result in serious personal injury. |
Pinpoint Test C
C3
204-069 (T81P-1104-C) Remover/Installer, Front Wheel Hub
- NOTE: Remove the bearing using a Bearing Puller and Step Plate.
- Special Tool(s): 204-069 (T81P-1104-C) Remover/Installer, Front Wheel Hub
- General Equipment: Puller
- click to open the image
C4
204-069 (T81P-1104-C) Remover/Installer, Front Wheel Hub
- NOTE: Remove the bearing using a Bearing Puller and Step Plate.
- Special Tool(s): 204-069 (T81P-1104-C) Remover/Installer, Front Wheel Hub
- General Equipment: Puller
- click to open the image
ASSEMBLY
Pinpoint Test C
C3
307-587 Differential bearing installer and guide
- General Equipment: Hydraulic Press
- click to open the image
| WARNING | Before beginning any service procedure, refer to HEALTH AND SAFETY PRECAUTIONS Safety Warnings in information 100-00 General Information. Failure to follow this instruction may result in serious personal injury. |
Scheme 35
- Refer to: «HEALTH AND SAFETY PRECAUTIONS»(ref-539149-S05516616262013040100000) (100-00 General Information, Description and Operation). Torque: 6 Nm Torque: 11 Nm
- To install, reverse the removal procedure.
| WARNING | Before beginning any service procedure, refer to HEALTH AND SAFETY PRECAUTIONS Safety Warnings in information 100-00 General Information. Failure to follow this instruction may result in serious personal injury. |
Scheme 36
Scheme 37
Scheme 38
- Refer to: «HEALTH AND SAFETY PRECAUTIONS»(ref-539149-S05516616262013040100000) (100-00 General Information, Description and Operation).
Scheme 39
- Material: Motorcraft® MERCON® LV Automatic Transmission Fluid / XT-10-QLVC (WSS-M2C938-A) (MERCON® LV)
- Torque: 11 Nm
- Torque: 11 Nm